Slayer 1 Group Espresso

$11,580.00 Sale Save
Tray Option, Standard.

Item is in stock Only 0 left in stock Item is out of stock Item is unavailable


Slayer Espresso 1 Group

 

Includes Free shipping & installation of your espresso machine with a trained, local representative. Includes, local installation to buyer made ready water, electric & carpentry, drink set up, & demonstration. 2-year parts & 1 year labor due to defective parts.

Ask about our machine, grinder & water filter packages.

Highlights Slayer is the machine for the discerning coffee professional. Its beauty and craftsmanship command attention and most importantly its coffee truly tastes different.

Created by coffee lovers and built with no compromises Slayer expertly achieves their goal and yours:

MAKE BETTER COFFEE The Slayer One Group is a professional espresso machine with flavor profiling, and it excels in the home or café. Each unit is entirely hand-built in Seattle. This is a serious baristas dream machine. In a compact footprint,

Slayer Single Group packs the same commercial head, steam valves, and brew actuator as its predecessors, plus a few extras. With a new touchscreen interface that assists in flavor profiling and temperature management, you're looking at a one-group espresso machine with unprecedented capability.

Enjoy the best that your espresso has to offer with Slayers signature flow needle valve control. In both manual and semi-automatic modes, the Single Group divides extraction into multiple stages and manipulates flow rate to highlight the inherent sweetness of espresso. Extreme grind fineness, made possible by patented pre-brew technology, lends to extraordinary body and beautiful crema.

Around the world, professional and amateur baristas alike are making exceptional coffee with the Slayer Single Group. It is Ideal for: espresso bars, small restaurants, catering events, your kitchen.

• Based in Seattle, Washington, USA

• 15-month parts only warranty

Give us a call to further discuss all of the features of the Slayer machine!

Unboxing Video Note - there is now a power switch inside the espresso machine, located underneath the removable cup warming tray on the bottom right-hand corner.

Technical Notes

• Glass touchscreen display

• Wood accents and handles

• Automatic shot timers

• Adjustable brew temperatures

• Direct plumb only • Nonslip feet

• Personalized steam pressure with PID

• Slayer shot mirror

• Temperature adjustments in .01 increments (C or F) • Passive preheating coil for greater temperature stability

• Flavor profiling with variable brew sequences

• Full pressure variable flow rate New Product

Features 

• Pump: rotary

• Circuit board: solid state relay

• Power switch: Internal switch for easy on/off

• LCD Display: no risk of burnouts

• Shot counter: lifetime account of shots pulled

• PID settings: better performance and stability

• Higher grade internal parts: reducing cost of maintenance over time

• Drip tray: removable drip tray available Included with the Slayer

• Slayer back flush cleaner

• 1 bottomless portafilter

• 18g Basket & back flush basket

• Water Test Kit

• Upgraded inlet solenoid base

• Peruvian Walnut wood Actuators & handles

• Glass touchscreen display

• Automatic shot timers

• Adjustable brew temperature

• Shot mirror • Hot water tap

• Non-slip feet

• Variable flow rate

• Personalized steam pressure with PID & customizable wand tip

• Dual tanks with power management

• Pre-heat coil for brew temperature stability

• Commercial portafilter with 58mm, 18g basket

• Direct plumb

• Certified ETL Sanitation* (conforms to NSF/ANSI Standard 4)

Product Details: External:

• Glass touchscreen UI

• Peruvian walnut actuators & handles

• Flavor profiling w/ various brew sequences

• Variable flow rate w/ precision needle valve

• Personalized steam pressure w/ PID & assorted tips

• Temp adjustable in 0.1º increments (C or F)

• Brew pressure gauge on front panel

• Smooth-flow hot water tap

• Slayer shot mirror

• Non-slip feet • Shot timers Internal:

1 Group Specifications.

• PID temperature & pressure control

• Dual boilers w/ power management

• Pre-heat coil for brew temp stability

• 1L brew tank*

• 3L steam tank**

• 60mL pre-heat coil

• Pressure transducer for rapid steam recovery

• Saturated brew group w/ auto-bleed

• Internal gear pump

• Direct plumb only 

• 110V / 20 A or 220V / 15A • 600W brew tank heating element

• 1,300W steam tank element for 110V

• 2,100W steam tank element for 220V

• CE Certified •

Width o Body: 18.1 in / 46.0 cm o Foot to foot: 17.7 in / 45.0 cm

 Depth Foot to foot: 17.5 in Back to front of drip tray: 22.7

Rear panel (top) to disengaged steam actuator (top): 11.2 in 

Heigh Top of rear panel: 12.75 in Top of brew actuator: 13.4 in / 34.0 cm o

Top of engaged steam actuator: 13.75 in / 34.9 cm o

Group height, drip tray to portafilter: 4.7 in / 11.9 cm

Weight o Dry: 100 lb. 

Shipping: ~160 lb. 

Warranty: 15-month

limited manufacturer's warranty on all electrical and mechanical parts.

Wearable parts (including but not limited to rubber seals, gaskets, are not covered under warranty, nor are labor.

Damage to or failure of your Slayer machine due to inadequately treated water is not covered under warranty.

All Slayer espresso machines need to be connected to a WATER SOFTNER water filter to remove SODIUM chloride AND OTHER MINERALS THAT AUSE CALSIUM from HARD water.

Protect your warranty & investment.

Protect your factory warranty and machine from harmful hard water minerals that cause calcium build up, & damage to your boiler, heating elements, water passages, and moving parts. This all in 1 filter is the answer for most hard water conditions.

Help the taste of your coffee with a BMT Bestmax premium 5 stage filter with magnesium for improved coffee taste or the standard 4 stage protection filter. When selecting the premium line with magnesium, we recommend a water meter so you know when it's time to change your filter as magnesium will show as a solid on a test strip.

Dial in the setting 1, 2 or 3 on the BWT filter head to match your water hardness and brew system needs. to get the proper protection & longest life based on degree of water hardness. Just twist the all in one cartridge out of the self-closing valve in head and spin the new replacement one in when needed, no water to shut off or turn on before changing,

The BWT 0.5-micron cartridge can lie sideways, set on its base or hang from the wall bracket included,

Recommended sizes based on water hardness and usage.

See our compete BWT accessories discount packages.

Competitive price matching is available for all our products.

Please complete this form when inquiring about best price for your item.

Defend your factory warranty and machine from destructive hard water minerals leading to calcium buildup, and harm to your boiler, heating elements, water passages, and moving parts. This all-in-1 filter is the solution for many hard water conditions.

Enhance coffee flavor with a BMT Bestmax premium 5 stage filter containing magnesium for improved taste or the standard 4 stage protection filter. For the premium option, consider using a water meter to monitor filter change based on magnesium levels.

Set the dial to 1, 2, or 3 on the BWT filter head to align with water hardness and brewing system needs. Achieve ideal protection and lifespan according to water hardness. Replace cartridges effortlessly without water shutdown.

The BWT 0.5-micron cartridge can rest horizontally, be placed on its base, or be hung from the included wall bracket.

Recommended sizes based on water hardness and usage.

See our compete BWT accessories discount packages.

Before finalizing your purchase, please contact us


Allow one of our professional commercial machine experts the opportunity to help guide you through your buying process and make sure you have selected the proper machine and options that best meets your needs.

Please Call Toll Free:

866-711-3456

or

973-687-5090

Enjoy free shipping on orders above $49 in the lower 48 states.

Additional shipping charges may apply commercial machine to residential address, and/or tail gate delivery required.

Please call (866)-711-3456 for any questions.